top of page

700 Series LoPro®

Appropriate for machines ranging from 20 to 45hp, the 700 series pockets are available in a straight, angle & reverse. These pockets take both the 700 series Greenteeth® & 700 series Wearsharp® teeth

Stump grinder teeth

We recommend our Wearsharp® teeth for the 700 series LoPro® pockets. 

 

Through extensive research & development, we found a way to improve upon our original Greenteeth® by altering the concave of the tooth. The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.

 

Made with the same high quality carbide as Greenteeth®, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth. Click here Wearsharp® flyer

 

Stump grinder teeth
Stump grinder teeth
LoPro® Bolt

 LoPro® bolts make up for the shortcomings of standard Allen bolts. 

  • Designed specifically to fit the angled shoulder of the LoPro® pockets

  • larger surface area on the angled shoulder for greater holding power

  • 1/2" Allen Drive

  • Smooth shank that reduces wheel wear

  • Grade 8 Heat treated for superior wear resistance.

GREEN-SEIZE™

GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

Stump grinder teeth

We recommend visiting our machine setup page to see which series is recommend for your machine.

bottom of page