900 Series LoPro®
Appropriate for machines ranging from 40 to 85hp, the 900 series LoPro pockets are available in a straight, angle & reverse. These pockets take both the 900 series Greenteeth® & the 900 series Wearsharp®.
We recommend our Wearsharp® teeth for the 900 series LoPro® pockets.
Through extensive research & development, we found a way to improve upon our original Greenteeth® by altering the concave of the tooth. The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.
Made with the same high quality carbide as Greenteeth®, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth. Click here Wearsharp® flyer
LoPro® Bolt
LoPro® bolts make up for the shortcomings of standard Allen bolts.
-
Designed specifically to fit the angled shoulder of the LoPro® pockets
-
larger surface area on the angled shoulder for greater holding power
-
1/2" Allen Drive
-
Smooth shank that reduces wheel wear
-
Grade 8 Heat treated for superior wear resistance.
GREEN-SEIZE™
GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.
We recommend visiting our machine setup page to see which series is recommend for your machine.