

1100 Series

For the higher horsepower machines, we offer the 1100 series pockets. Available in a counter-bore and threaded version of each the angle, straight & reverse pocket, we also offer a 3-hole version of these pockets for those applications that require increased clamping force.
These pockets take our 1100 series Greenteeth® and the 1100 series Wearsharp® teeth.

We recommend our Wearsharp® teeth for the 1100 series pockets.
Through extensive research & development, we found a way to improve upon our original Greenteeth® by altering the concave of the tooth. The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.
Made with the same high quality carbide as Greenteeth®, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth.Click here Wearsharp® flyer


Greenbolt® & Capscrews
Greenbolt®
-
Designed specifically to fit the shoulder on the 1100 Series pockets
-
5/8" external drive hex head for easier installation and removal vs a standard Allen bolt
-
Smooth shank that reduces wheel wear
-
Grade 8 Heat treated for superior wear resistance
We also carry cap screws for those customers who prefer a Allen drive socket.
GREEN-SEIZE™
GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

We recommend visiting our machine setup page to see which series is recommend for your machine.