top of page

Teeth & Pockets

Greenteeth Wheel New.png

Introduced in 2006, the LoPro® series of pockets have a slim design that allows for a 3/4" clearance between the side of the pocket & the stump to reduce pocket wear and improve overall performance. 


 Available in the 500, 700 & 900 series, every LoPro® pocket is designed with a threaded & counter-bored hole so that it can be placed on either side of the wheel.


Designed specifically to fit the angled shoulder of the LoPro® pockets, these bolts have a smooth shank to reduce wheel wear and an extraction slot for easy removal in the case of breakage.

500 Series LoPro®

Appropriate for the smallest machines on the market, the 500 series are for most machines under 20hp. Available in a straight & an angle pocket, these pockets take the 500 series Greenteeth®.


700 Series LoPro®

Appropriate for machines ranging from 20 to 45hp, the 700 series pockets are available in a straight, angle & reverse. These pockets take both the 700 series Greenteeth® & 700 series Wearsharp® teeth

700 pocket group wo Tooth.png

900 Series LoPro®

Appropriate for machines ranging from 40 to 85hp, the 900 series LoPro pockets are available in a straight, angle & reverse. These pockets take both the 900 series Greenteeth®& the 900 series Wearsharp®.


We recommend visiting our machine setup page to see which series is recommend for your machine.

1100 Series

For the higher horsepower machines, we offer the 1100 series pockets. Available in a counter-bore and threaded version of each the angle, straight & reverse pocket, we also offer a 3-hole version of these pockets for those applications that require increased clamping force.


These pockets take our 1100 series Greenteeth® and the 1100 series Wearsharp® teeth.


Used only with the 1100 series pockets, the Greenbolt® has a smooth shank to reduce wheel wear, and an external drive head for easy installation & removal. 

Cap Screws

We also carry cap screws for those customers who prefer a Allen drive socket.


Through extensive research & development, we found a way to improve upon our original Greenteeth® by altering the concave of the tooth. The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.


Made with the same high quality carbide as Greenteeth®, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth.


GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

bottom of page