700 Series LoPro®

700 Series
700 Series

700LP-R
700LP-R

Worn Wearsharp Tooth
Worn Wearsharp Tooth

700 Series
700 Series

1/7

Appropriate for machines ranging from 20 to 45hp, the 700 series pockets are available in a straight, angle & reverse. These pockets take both the 700 series Greenteeth® & 700 series Wearsharp® teeth

Wearsharp.png

We recommend our Wearsharp® teeth for the 700 series LoPro® pockets. 

 

Through extensive research & development, we found a way to improve upon our original Greenteeth® by altering the concave of the tooth. The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.

 

Made with the same high quality carbide as Greenteeth®, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth.

 

LP%20Bolt%20tsp_edited.png
LoPro® Bolt

 LoPro® bolts make up for the shortcomings of standard Allen bolts. 

  • Designed specifically to fit the angled shoulder of the LoPro® pockets

  • larger surface area on the angled shoulder for greater holding power

  • 1/2" Allen Drive

  • Smooth shank that reduces wheel wear

  • Grade 8 Heat treated for superior wear resistance.

GREEN-SEIZE™

GREEN-SEIZE™ is a premium anti-seize compound composed of fine copper and graphite powders in a high-heat organic carrier. We recommend lubricating the threads of the pocket bolts to make removal easier.

GS-2-896x1024_edited.png

We recommend visiting our machine setup page to see which series is recommend for your machine.