top of page

REVERSE-S® CUTTING SYSTEM

bark-close-up-dry-593152.jpg
Reverse-S Stump Cutter wheel

REVERSE-S® 

Designed for the higher horsepower machines, what sets the Reverse-S®  wheel apart from others is the unique placement of the pockets in a reverse-spiral step-out design that creates multiple cutting planes. These planes create a specific cutting pattern that provide a larger overall cutting arc, ensures that the teeth are taking the proper amount of material for each pass, and allows you to maintain a faster sweep speed. The wheel almost appears to be mounted backwards, as compared to other wheel designs.

bark-close-up-dry-593152.jpg

The unique pocket placement is achieved by using spacers behind the inner pockets, ensuring the teeth mounted in those positions strike the stump first.

 

In a traditional spiral, 2 or more teeth are engaged in the cut at a time. This bogs the motor down, decreases RPM and increases the chip load per tooth which leads to chattering.

 

With 120 degrees of separation between each tooth, the Reverse-S®  pattern breaks up the traditional spiral by cutting in a 27" arc with only one tooth engaged in the stump at a time.

Made in USA Greenteeth
Reverse-S

Each Reverse-S® wheel kit is accompanied by detailed installation instructions designed to assist you throughout the entire installation process.

Greenteeth
bark-close-up-dry-593152.jpg

We stand behind our products with a 100% Satisfaction guarantee. If you don't notice a cost savings from the purchase of your wheel within 90 days, you can return it to us for a full refund.

We recommend visiting our machine setup page to see all available options for your machine.

bottom of page